LARES ARGB Case
Feature
- Glass Panel
- Cooling Design
- Ample Space for Fans
- Supports All Gaming Hardware
- All-around Dust Protection
- Glass Side Panel
- High Speed I/O Solution
- Magnetic Partition
- Ample Hard Drive Space
- Independent Slot for Power Supply Unit
Introduction
Glass Panel
Glass panel embedded from the front gives the T-FORCE LARES case a unique look. The addition of simple, classy ARGB side lights also delivers a quality look and thrilling ARGB colors.
Cooling Design
The front panel is designed to have large air inlets on both sides and multiple air vents on the top and bottom of the case. We pay attention to air flow so users will never have to suffer from overheating again.
Ample Space for Fans
The front alone supports three 120mm fans or two 140mm fans. Users can opt to install four + two 120mm fans on the inside (3 on the top, 1 in the back, and 2 on the bottom).
Supports All Gaming Hardware Sizes
The T-FORCE LARES has enough space to support high-end graphics cards, an E-ATX Motherboard, liquid cooling hardware, and anything else that your heart desires.
All-around Dust Protection
Each opening is equipped with dust filters to prevent dust from infiltrating and wreaking havoc on precious components.
Tempered Glass Side Panel
Brilliant RGB lighting effects and personalized components will all be displayed in full with the glass side panel.
High Speed I/O Solutions
The diverse high-speed I/O ports were designed in consideration of what gamers actually use and are placed on the upper part of the front panel to prevent interference from kicking or pet disturbances.
Magnetic Partitions
A unique magnetic compartment is designed at the bottom for flexible installations. The magnetic board can be placed on top of the case when users are looking to install 2.5" components or removed for better airflow or for two 120mm fans.
Ample Hard Drive Space
Provides over 6 slots for hard drive installations: two 2.5" screw holes on the magnetic board as well as two 2.5" and two 3.5" slots on the other side of the case.
Independent Slot for Power Supply Unit
The slot for the power supply unit is at the bottom of the case to cushion the impact of vibrations from the unit on other components and to make installation that much easier.
Product Specifications
| Color | Black |
| Case Type | Tower Chassis |
| Material | [Side panel thickess] 0.7mm (Tempered glass 3mm) [Body] 0.6mm SGCC |
| I/O Port | USB 3.0*2、USB 3.1 Type-C*1、HD Audio |
| Motherboard | E-ATX(width: under 280mm)/ATX/Micro-ATX/ITX |
| VGA Length | 420mm |
| Power Supply Unit | 224mm |
| CPU Clearance | 175mm |
| Storage Space | 3.5/2.5" x2 and 2.5" x4 |
| Expanded Capacity for PCIe Interface | 7+2 |
| Fan Support | 12CM fans: 3 in the front, 3 on the top, 2 on the compartment, and 1 in the back; 14CM fans: 2 in the front and 2 on the top |
| Radiator | 360 & 240mm in the front; 360mm on the top; and 120 mm in the back |
| Filter | Front, top, and bottom |
| Dimensions | 220mm*472mm*450mm |
| Weight | 8.25kg |
| Accessories | Set screws, fan screws, and cable ties |
| Warranty | 2-year limited warranty |
Notes
- We reserve the right to modify product specifications without prior notice.
- LARES ARGB Case Installation Guide
